Graphic User Interface (GUI)
Dash7 has unique Graphic User Interface. GUI consists of Startup page with customised logo, Connection page, menu
pages and 5 fully customised data pages. Data pages and Startup page can be completely customised. You can
download templates or create your own design in our V3MS Web Dash Designer. You can use your own logo (picture
or short video) at the Startup page . Also you can add a small logo at any data page you like.
After creating GUI in Web Dash Designer, just send it to us and after validating we will send you a file. Upload this file
to the microSD card, insert the card to the SDcard adapter delivered together with your Dash7, put the adapter to
the Dash7 SDcard port located on the top of the display unit (with QR code or label faced to you) and upload your
new GUI to the device. Below you can find step by step instructions how to perform GUI update.
GUI Update procedure:
1.
Turn OFF the Dash7 (turn OFF ignition or another switch which cuts power supply to the Dash7)
2.
Insert the microSD card with a new GUI file to the SD card adapter delivered with Dash7 (card must be
FAT32 formatted and the GUI file must be loaded into a root directory)
3.
Remove a dust protection cap from SD card slot located at the top of the Dash7 display unit
4.
Gently insert SDcard adapter with microSD card to the SD card slot (with QR code or Label faced to you).
A click is heard when the adapter is inserted and the adapter remains locked in the holder.
5.
Turn ON Dash7
6.
Update will start immediately. You will see a white screen with red letters and numbers. After few
seconds screen will show message „100%“ and „Update Succesfull“
7.
Turn OFF Dash7
8.
Push gently down the SD card adapter and release it from the display unit
9.
After the SDcard was removed, insert a dust protection cap back to its place and turn ON the power
supply of your Dash7
10.
Done! Enjoy your new GUI !
NOTE: in some cases, when Dash7 was not updated for a long time, after restart a white screen could be displayed
again with message „firmware upgrade“. It is normal and after few seconds your new GUI will be displayed. If not,
please restart Dash7 again. After restart device should work normal and will display your new GUI.