PTZ-BOX 5.0 User manual, document edition: 13
19
M
–
MID sealing mark,
I
–
installer seal,
V
–
temporary seal (for the time of transport).
Figure 5. External sealing of PTZ-BOX 5.0 device
After mounting of device, installation staff is obligated to place own wire protection seal accordingly
to scheme on Figure 5. During transportation, terminals chamber is protected with temporary seal
–
which has appropriate marking. Installation staff after checking its condition may remove it.
In accordance with the Directive ROHS 2011/65/UE, where applicable, it is unacceptable
to use lead seals.
