Vemer memo RF Скачать руководство пользователя страница 58

Страница: 58 / 64

gli

- 56 -

User manual memo RF

RESET MENU

“Reset” menu allows you to restore the initial state of the device.

Available resets:

Settings reset: deletes all the carried out settings (except the language, PIN and the channel settings on the BUS RF)

Time programs reset: deletes all saved time programs

Holiday programs reset: deletes all saved holiday programs

Astro programs reset: deletes all saved astronomical programs

Counter reset: resets the counters of all channels

All reset: carries out all the above described resets and deletes the language, PIN protection and the channels settings on the BUS RF

There is also another reset, of hardware type, which allows you to reset the device in case it responds to the pressing of the keys so

unexpectedly, without losing the carried out settings/programs (only the date and the time are lost).

To carry out a hardware reset:

press the key “R” with a sharp object

The hardware reset is also useful when you forget PIN protection. Reset, in fact, unlocks the keyboard for 3 minutes, the necessary time to

access the appropriate menu and check/disable PIN.

Содержание memo RF

































































Результаты поиска

Содержание memo RF

Отзывы:

Vemer memo RF, Руководство пользователя, Страница: 58 / 64

Результаты поиска

Содержание memo RF

Отзывы: