Vemer memo RF, Руководство пользователя, Страница: 12 / 64

En
gli
sh
- 10 -
User manual memo RF
At the start the app displays the list of the associated memo devices.
To associate a new device, press the symbol “+” in the upper right corner.
All the Bluetooth devices detected nearby are displayed: select the device to be associated from the list.
Note: each device is identified by the product code (for example VE790200) and by the serial number (for example 00000020).
These informations can be viewed from the main page of the memo RF.
Warning: make sure that the memo RF is mains powered and that the display shows the main page (initial).
Otherwise the Bluetooth interface is not active and the device is not visible.
Enter the password to associate the memo RF with your device (if not modified the password is 123456).
After successfully completing the procedure, the memo RF is added in the list of the associated devices.
Select the memo RF on which you want to act from the list of the associated devices.
Note: communication between the app and the memo RF is point-to-point. This means that,
even in the presence of multiple memo RF, the app can communicate with one only at a time.
The memo RF currently connected to the app displays the symbol * immediately after the serial number.
The app displays the initial page of the selected memo RF. From this page you can:
a. Create new programs that will then be copied to the memo RF
b. Change the settings of the memo RF
c. View the parameters and associate an alias (name that identifies the time switch, such as “memo RF Belluno”)
to the memo RF
d. Manually control the relay output/s and activate the random switching function