- 26 -
User Manual
Athena
English
14 Zone name, external temperature, or manual temperature reading
15 Measured temperature
16 Temperature measurement or acquisition in process
17 Unit of measurement °C/F
18 Manual operation
19 Wireless card IN
20 Extension program enabled
21 Telephone dialler status
Keypad (Figure 2):
• 1: ESC button
• 2: joystick; press the centre for
[OK]
press the sides for , , , ,
• 3: manual operation key
PROGRAMMING
SWITCH ON RESET
• Place batteries and then press the
[R]
reset key (see the “battery placement" diagram
on page 45). This does not erase previous programming but only date and time.
• All the segments on the display will flash and the relay will be actuated for approx. 3s.
• The display goes off and then back on with the time reading flashing.
• The clock keeps working regularly, whereas temperature control is inhibited until the
time is set.
Note: to restore the device's default conditions, press the [R] key and then the
[OK] key.
SETTING THE TIME
• Press the joystick centre
[OK]
, and access the first menu, i.e. the time and date
setting menu, which is marked by symbol
. The page opposite will be displayed.
• To change the fields displayed press the
[OK]
key again.
• The field to be modified will start to flash. Increase or
decrease the value by keys and respectively,
then confirm and move on to the next field by keys
and .
• The fields that can be modified are:
°
seconds: press to set them to zero
and increase minutes, press to set them to 0
°
hh:mm
ESC
Figure 2
