manualshive.com logo in svg

VEMAG 160.0215, Руководство по эксплуатации

Поделиться
Скачать
VEMAG 160.0215 Скачать руководство пользователя страница 133

ROBOT HP7E / HP10E / HP12E / HP15E / HP20E

8. Maintenance

8-5

© VEMAG 2010

8.2 Grease gun

The cartridges for the grease gun supplied are replaced as follows:
•  Pull piston rod (1) back firmly to the stop.
•  Unscrew the head of the grease gun (2) and pull out the empty 

cartridge.

•  Remove the cap of the new cartridge and insert fully into the grease 

gun with this open end first.

•  Either cut off the base of the cartridge (3) completely with a knife or 

pierce a hole in it.

•  Screw the head of the grease gun back on and push the piston rod 

back in, pressing down the small retaining lug (4).

•  If no grease emerges after a number of pump strokes, vent the grease 

gun by pressing the relief knob (5) whilst pumping.

1  Piston rod

2   Head

3   Cartridge

4   Retaining lug

5   Relief knob

Fig. 8-6

Grease gun

2

1

4

3

5

Содержание 160.0215























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды