manualshive.com logo in svg

VEMAG 160.0215, Руководство по эксплуатации

Поделиться
Скачать
VEMAG 160.0215 Скачать руководство пользователя страница 118

ROBOT HP7E / HP10E / HP12E / HP15E / HP20E

7. Cleaning

7-6

© VEMAG 2010

7.2.6 Hopper

Danger!

 

There is a risk of crushing when fitting/removing the feed screw. To pre-

vent injury, proceed extremely carefully when fitting and dismantling the 

part. 

•  Unlock the two locking levers (1) on the hopper housing and carefully 

tip the hopper backwards. Hold the hopper firmly by flange (2) as you 

do so.

•  Remove the scraper in the hopper (if present).
•  Push back the three sliding sleeves (3) in the hopper flange, holding 

the feed screw (4) steady with the other hand. Carefully twist the feed 

crew out of the hopper flange.

1  Locking levers

2  Flange

3  Sliding sleeves

4  Feed screw

Fig. 7-9

Hopper

1

2

1

3

4

•  Remove the sealing ring (1) from the hopper flange (2). Use the ap-

propriate tool at the cleaning plug (3) to do this.

1  Sealing ring

2  Hopper flange

3  Cleaning plug

Fig. 7-10

Feed unit seal

1

2

3

Содержание 160.0215























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды