21
INSTALLATION
MANUAL
3.4 INSTALLATION OF THE SINGLE-PHASE AND THREE-PHASE METER SET
1. Select the circuit onto which you wish to install the METER SET.
2. Install the energy meter and the smart gateway next to one another, maintaining
contact between the elements of each device that enable them to communicate by
means of infrared signals.
3. Strip the power cables 10 mm, and the neutral cable 8 mm.
3- INSTALLATION
The METER SET is made up of two elements: an energy meter and a
smart gateway.
At the meter outlet
Power control and Solar Charge
In the home circuit
Power control
The energy meter and the smart gateway are designed for installation
on a DIN rail (DIN EN 60715).
Housing
association
Detached
property
ENERGY
METER
GENERAL
CONTROL
PANEL
CHARGER
CONTROL
PANEL
METER
Contracted
power
