Veloteq Treadmill, Руководства

Страница: 4 / 23

Special Safety Precautions

Power source:

Choose a place in reach of a socket when placing the treadmill.

Always connect the appliance to a socket with a grounded circuit and no other
appliances connected to it. It is recommended not to use any extension cords.

A FAULTY GROUNDING OF THE APPLIANCE CAN CAUSE THE RISK OF
ELETRICAL SHOCKS. ASK A QUALIFIED ELECTRICIAN TO CHECK THE
SOCKET IN CASE YOU DO NOT KNOW IF THE APPLIANCE IS GROUNDED
APPROPRIATELY. DO NOT MODIFY THE PLUG PROVIDED WITH THE
APPLIANCE IF IT IS NOT COMPATIBLE WITH YOUR SOCKET. ASK A
QUALIFIED ELECTRICIAN TO INSTALL A SUITABLE SOCKET.

Sudden voltage fluctuations can seriously damage the treadmill. Weather
changes or switching on and off other appliances can cause peak voltages,
over-voltage or interference voltage. To limit the danger of damage to the
treadmill, it should be equipped with an over-voltage protective device (not
included).

This appliance is designed for use with ~220 - ~240 Volt rated voltage.

Keep power cord away from the carrying roller. Do not leave the power cord below
the striding belt. Do not use the treadmill with a damaged or worn out power cord.

Unplug before cleaning or engaging in maintenance work. Maintenance should
only be done by authorised service technicians, unless otherwise stated by the
manufacturer. Ignoring those instructions would automatically void the warranty.

Inspect the treadmill before every use to make sure that every part is operational.

Do not use the treadmill outdoors, in a garage or under any kind of canopy. Do not
expose the treadmill to high humidity or direct sunlight.

Never leave the treadmill unattended.
Make sure the striding belt is always tense. Start the striding belt before stepping on it.
Assembly

Before starting with the assembly of this fitness device, carefully read through the
set up steps as of page 6 we also recommend that you view the assembly drawing
prior to assembly (page 5).

Remove all packaging material and place the individual parts on a free surface.
This will provide you with an overview and will simplify assembly.

Please consider that there is always the risk of injury when using tools and
carrying out technical activities. Please proceed with care when assembling the
device.
3