Veloteq CF-2104, Руководство пользователя

Страница: 9 / 14

9
Step3 (as picture 3 show)
1. Take out console (46), connect right
controller wire (79) to the wire (80)
from right post (3), and make sure the
connecting is firm.
2. Put the connected wire through the
right post(3)pipe, put the console on
both right post (3)and left
post(2),adjust the hole location
aligned
，
Open hardware bag, take out
M8X15L screw(14),flat washer(35),
use correct tools to tight the screw.
Step4 (as picture 4 show)
1. take outside post supporter
（
9
）
, put
it in the middle of two side posts
（
2
）
（
3
）
,adjust the hole location aligned,
Open hardware bag, take out
M8X15L screw (10) ,flat washer(35),
use correct tools to tight the screw.
Step5 (as picture 5 show)
1. Take out right handle
（
8), connect wire
(69)(71) from right handle with
wires(70)(72)from right post, and keep
firm.
2. Put the connected wires into console
(46), put right handle (8) on right of the
console, take out M8X55L screw (14),
flat washer (35), and use correct tools
to tight the screw through below of the
console.
。
3. Left handle (7) assembling the same
way as right handle (8).
Picture 3
Picture 4
Picture
5