Velodyne HDL-64E S3 Скачать руководство пользователя страница 19

Страница: 19 / 54

HDL-64E S3

High Definition LiDAR Sensor

Page 19

Velodyne LiDAR, Inc.

2019

63-HDL64ES3 REV K

Packet Format and Status Byte for GPS Time Stamping

The 6 bytes at the end of the data packet report GPS timing and synchronization data. For every packet,
the last 6 bytes are formatted as follows:

Timestamp Bytes in Reverse Order in microseconds

Bytes

Description

Notes

GPS

timestamp

32 bit unsigned integer timestamp. This value represents microseconds from
the top of the hour to the first laser firing in the packet.

Status

Type

8 bit ASCII status character as described in Appendix E. The status byte
rotates through many kinds of sensor information.

Status

Value

8 bit data as described in Appendix E.

Within the GPS status byte, there are 4 GPS status indicators:

No GPS connection.

Both PPS (synch) and GPS command have signal.

Only GPS command signal, no PPS (synch).

Only PPS (synch) signal, no GPS time command.

Timestamp Accuracy Rules and Accuracy

The following rules and subsequent accuracy apply for GPS timestamps:

GPS Connection

Timestamp Info

Accuracy

Notes

GPS isn’t
connected (GPS
Status 0)

The sensor starts running on
its own clock starting at
midnight Jan 1 2000. This
date and time data is
reflected in the H, M, S, D,
N, and Y data values.

Expect a drift of about 5
seconds/day.

The sensor clock
does not correct for
leap years. See
Appendix E for more
information.

GPS is connected

The H, M, S, D, N, and Y
data values are obtained
from the $GPRMC NMEA
record.

GPS time synching runs in
one of two modes:

The GPS is used first.
The accuracy is of the
GPS device employed.

When the GPS
achieves lock, the
sensor clock is then
/-50µs of the
correct time at all times.

GPS is
disconnected
after being
connected

The sensor continues to run
on its own clock.

Expect drift of about 5
seconds/day

Содержание HDL-64E S3























































Результаты поиска

Содержание HDL-64E S3

Отзывы:

Похожие инструкции для HDL-64E S3

Бренды по названию

Популярные бренды

Velodyne HDL-64E S3, Руководство пользователя и программирования

Результаты поиска

Содержание HDL-64E S3

Отзывы:

Похожие инструкции для HDL-64E S3

Бренды по названию

Популярные бренды