Velocity VCH8FA119P60B, Инструкция по установке и эксплуатации

Страница: 3 / 45

1
I. SAFETY SECTION
This page and the following contain various warnings and cautions found
throughout the Oil Furnace Manual. Please read and comply with the statements
below.
WARNING AND CAUTIONS:
WARNING: This furnace is not to be used as a construction heater. See Page 3
WARNING: The predetermined limit locations on all of the Velocity oil-fired furnaces
have been tested and approved. Any attempt to relocate these safety controls or
replace these safety controls with a control that is not approved, or is incompatible, may
result in personal injury, substantial property damage or death. See Page 14
WARNING: THE HEAT EXCHANGER MUST BE CLEANED BY A QUALIFIED
SERVICE PERSON. See Page 30
CAUTION: DO NOT ATTEMPT TO MAKE REPAIRS YOURSELF! See Page 28
WARNING: The area around the furnace should be kept free and clear of
combustible liquids and material, especially papers and rags. See Page 3
WARNING: NEVER burn garbage or refuse in your furnace. Never try to ignite oil
by tossing burning papers or other material into your furnace. See Page 28
WARNING: Velocity oil furnaces are designed to burn No. 1 or No. 2 distillate fuel
oil. NEVER USE GASOLINE OR A MIXTURE OF OIL AND GASOLINE. A biofuel
mixture may be used but the mixture is not to exceed a B5. See Page 28
CAUTION: DO NOT ATTEMPT TO START THE BURNER WHEN:
1. Excess oil has accumulated,
2. The furnace is full of vapors
3. The combustion chamber is very hot.
IF ONE OR MORE OF THESE CONDITIONS EXIST, CONTACT A QUALIFIED
SERVICE PERSON. See Page 28
WARNING: DO NOT START BURNER UNLESS BLOWER DOOR IS SECURED IN
PLACE.