10
Wireless Setup
1. Turn off your camera and the
ShutterBoss receiver.
2. Mount the receiver into your
camera’s hot shoe, and rotate
the thumbwheel until secure.
Note: If your camera’s hot shoe
is in use, you can mount the
receiver to a bracket or cage
via its mounting foot or 1/4-20
socket.
3. Connect the shutter release
cable’s sub-mini plug end to
the receiver’s shutter release
port, and the other end to
your camera’s remote socket.
4. Turn on the camera and the
ShutterBoss transmitter and
receiver.
Note: Be sure to read your
camera’s manual for instructions on
using remotes.
