Flash Groups
Channel
14
SELECTING CHANNELS
ABOUT FLASH GROUPS
On the FreeWave IR Commander,
four channels (1, 2, 3, and 4) are
available. You can use this option
to prevent your flashes from being
triggered by another photographer
working with a similar system nearby.
To select the channel, press the
Set
button repeatedly until the channel
number blinks. Use the
Left and
Right
[ ] navigation buttons to cycle
through channel numbers 1 through 4.
Note: Make sure your slave flashes are set
to the same channel as the Commander.
On the FreeWave IR Commander,
three flash groups (A, B, and C) are
available, and you can combine multiple
slave flashes within the same group.
When setting groups on the
Commander, make sure to set your slave
flashes to the corresponding groups.
Note: Be aware of the independent
recycling time of each flash to ensure
all flash units are ready to fire.