![background image](http://html1.mh-extra.com/html/vello/freewave-fusion-basic/freewave-fusion-basic_user-manual_3937077013.webp)
13
SELECTING THE GROUPS
1.
Gently press the Group/Power button
on the Transmitter. The group indicator
LED(s) will light up to indicate which
groups are currently selected.
2.
To change group selections, press the
Group/Power button again. Keep pressing
the Group/Power button to cycle through
all the Group options: A only; B only;
C only; A and B; A and C; B and C; A,
B and C.
3.
To see which groups are currently
selected at any time, gently press the
Group/Power button. The Group
indicator light will turn off after 2
seconds. However, even after powering
down, the transmitter will remember the
last group selected.
4.
To verify light and group selection, press
the shutter release button on either the
camera or the FreeWave Transmitter
halfway. The LED at the top of the
Receiver will turn green on each currently
selected Receiver.
Содержание FreeWave Fusion Basic
Страница 1: ...FREEWAVE FUSION USER MANUAL...