PRODUCT OVERVIEW
Specifications
Indicator Window
Dehumidifier body
Indicator
Heating base
USING THE DEVICE
INDICATOR WINDOW TIPS
DRY
(Orange)
Heating
Dehumidify
DAMP
(Dark Green)
This dehumidifier works on the principle of absorbing crystals that absorb moisture.
The dehumidifier body does not contain any active electronics, so there is no switch or
other controls on it. After inserting absorbing crystals for further use will be started.
Please read this manual carefully before using the product and keep it properly. Alter-
natively, solutions to common problems can be found in the FAQs section at the end of
this manual.
Any other support, feel free to email at [email protected].
Some parameters may vary depending on the ambient temperature and humidity.
Moisture absorption
80-100ML
:
0-55 square feet
Coverage area
:
300+ times
Recyclable times
:
Model
:
X1
Dehumidifying Material
:
SiO
2
:
Dimensions (With base)
4.72*4.72*10.62 inches
Power consumption
:
45W ±15%
Input Voltage
:
AC100-120V 50/60Hz
View indicator window, if indicator beads are orange, the unit is ready touse. If
indica tor beads are green, the unit needs to renewed. (See step5)
Place the unit in desired location to begin dehumidification cycle.
Monitor indicator beads for transition from orange to green.
Once indicator beads turn green, it is time to renew the unit.
To renew, place the unit on the heating base and power it on until it is orange.
Once renewed, indicator beads will return to orange and the unit will be ready to use
again.
1:
2:
3:
4:
5:
6:
Please renewing the dehumidifier unit for drying at first time using.
The heating base shuts off automatically after 2 hours, If the indicator
beads still not turn to orange fully, repeat the drying cycle.
Perfect for Small Space: Gun Safe • Closets • Kitchen • Cabinets• Piano Stands • Book-
cases • Safe Deposit Boxes • Storage Unit • Small Space
Tips
:
