WS8707
07.10.2010
©Velleman
nv
5
S1
sensor display
S4
channel selector
S2
suspension
S5
°C/°F selector
S3
test button
S6
battery compartment
6.
Settings
Refer to the illustrations on page
2
of this manual.
•
Insert batteries in the battery compartment at the back of the weather
station. Follow the polarity as indicated in the battery compartment (see
§9
).
Setting the date and time
•
To switch between 12h and 24h format, press UP
[C]
.
•
Press and hold SET
[I]
for ±2s. The year indication starts flashing
[4]
.
•
Press the UP
[C]
or DOWN
[B]
to set the year, press SET
[D]
to confirm.
The month indication
[1]
starts flashing.
•
Use UP
[C]
or DOWN
[B]
to successively set the month
[1]
, date
[1]
,
day language
[2]
(EN= English, IT = Italian, FR = French, NE = Dutch,
ES = Spanish, DA = Danish, GE= German), hour
[4]
, minutes
[4]
and
time zone
[4]
. Confirm each setting with the SET button
[D]
.
Notes:
•
press and hold UP
[C]
or DOWN
[B]
for fast progress
•
day of the week and moon phase change automatically depending on
the set date and time.
•
the display will return to normal operation after ±7s of inactivity
Alarm setting
•
Press and hold ALARM
[E]
for ±2s. The alarm time is displayed
[4]
and
the hour indication is flashing.
•
Use UP
[C]
or DOWN
[B]
to successively set the hour and minutes.
Confirm each setting with the ALARM button
[E]
.
Remote sensor
•
Slide the back of the remote sensor open (slide down) and make sure
batteries are present inside the remote sensor (see
§9
).
•
Set the channel selector
[S4]
to the desired channel (1~3). The channel
is indicated on the LCD
[S1]
.
Note:
when multiple sensors are used they must be set to different
channels.
•
Set the same channel on the clock using the channel selector
[F]
. The
channel is shown on the LCD
[13]
.
•
Press the test button
[S3]
to test the link between the sensor and the
clock. When everything works fine, a link indicator
[14]
lights up
briefly on the LCD and the clock will beep once.
•
Press the °C/°F selector
[S5]
to set the temperature scale on the remote
LCD
[S1]
to °C or °F.
Note:
this setting is only applicable for the temperature indication on the
remote sensor itself, not on the clock.
•
Close the back of the sensor.
Содержание WS8707
Страница 2: ...07 10 2010 WS8707 2 7 Velleman nv...
