Velleman VTSG60SFN, Руководство пользователя

Страница: 6 / 46

VTSG60SFN
V. 03
–
03/02/2021 6 ©Velleman nv
3. General Guidelines
Refer to the Velleman
®
Service and Quality Warranty on the last pages of this manual.
All modifications of the device are forbidden for safety reasons. Damage caused by user
modifications to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised way
will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the
warranty and the dealer will not accept responsibility for any ensuing defects or
problems.
Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary,
incidental or indirect)
–
of any nature (financial, physi
cal…) arising from the possession,
use or failure of this product.
Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
1 solder reel 4 power switch
2
feeding hole
5
feeding trigger
3
fast-feeding button
6
extraction tube
5. How to Solder
File off any dirt, rust or paint on the parts you wish to solder.
Heat the parts with the soldering iron.
Apply resin-based solder to the part and melt it with the soldering iron.
Be sure to apply a solder paste to the part before applying non resin-based solder.
Wait for the solder to cool and harden before moving the soldered part.
Handle a heated soldering iron with extreme care as the high temperatures may cause
burns.
The soldering iron may produce smoke at first use due to a dried out heating element.
This is normal and should only last for approx. 10 minutes.
Never file the soldering tip.
Use a soldering iron stand in order to avoid burns.
The temperature of the soldering iron will drop if it is used without the tip.
Let the soldering iron cool after use.