Velleman VTLLAMP15, Руководство пользователя

Страница: 4 / 27

VTLLAMP15
V. 01 – 06/09/2017 4 ©Velleman nv
 Indoor use only. Keep this device away from rain,
moisture, splashing and dripping liquids. Never put
objects filled with liquids close to the device.
 Keep away from excessive heat and direct sunlight.
 The housing might heat up during usage. Keep
minimum distances around the device for sufficient
ventilation. Place the device on a flat, heat-resistant
surface. Do not place the device on carpets, fabrics…
 For non-replaceable light sources:
The light source of this luminaire is not replaceable;
when the light source reaches its end of life, the whole
luminaire shall be replaced.
 Where the mains plug or an appliance coupler is used
as the disconnect device, the disconnect device shall
remain readily operable.
 If the external flexible cable or cord of this luminaire is
damaged, it shall be replaced by a special cord or cord
exclusively available from the manufacturer or his
service agent.
 Do not use the luminaire with a cracked or broken
protective shield. Disconnect immediately from the
mains. The protective shield is not replaceable.
 This device contains an internal rechargeable battery.
When the device reaches end-of-life, it must be
disposed of in accordance with local regulations.
3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of
this manual.
4. Operation
1. Fully charge the lamp prior to first use: connect to a powered USB port
and leave to charge for at least 2 hours.
2. Clamp the lamp onto the desk.
3. Tap the on-off switch to switch on, to select the colour (warm, cold
and warm-cold) and to switch off.
4. Hold the on-off switch pressed to dim the LEDs up or down.
5. Switch off after use.