Velleman VTBAL2, Руководство пользователя

Страница: 3 / 7

VTBAL2 VELLEMAN 3
VTBAL2 – MINI SCALES (500g / 0.1g)
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the
VTBAL2
! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
2. Use
a. Preparation
•
Open the battery compartment at the back of your scales and insert both batteries. Mind the polarity. Make
sure the cover is placed on the scales.
b. Calibration
•
Remove the lid and press the ON / TARE button. The VTBAL2 will display “0.0” and “g” meaning the
weighing unit is grams. If not, press the CAL / MODE button until it does.
•
Hold the CAL / MODE button pressed for 3 seconds until “CAL 0” flashes onto the display.
•
Put one of the standard calibration weights (20g, 40g or 100g) onto the weighing platform.
•
Wait a couple of seconds until “CAL F” is displayed. The scales are now calibrated and ready for use. “CAL
E” is displayed when an error has occurred. In that case, repeat steps 2 to 4.
c. Other Functions
•
Press the CAL / MODE button to choose the weighing unit: g (grams), oz (ounces), dwt (pennyweight), ozt
(troy ounces), grain and Ct (carats).
•
“LO- -”: low battery indication. Replace the batteries with of the same type and specifications.
•
“O- -Ld”: weight overload.
3. Technical Specifications
Power Supply
2 x 3.0V CR2032C batteries (incl.)
Capacity 500g
Resolution 0.1g
Tare Range 0 ~ 500g
Operation Temperature 15°C ~ 35°C
The information in this manual is subject to change without prior notice.