Velleman VRC801, Руководство пользователя

Страница: 2 / 20

VRC801
- 2 - VELLEMAN
This means that you should always use the following procedure : press SET, press a device key, press SET again and
press POWER repeatedly until the selected device reacts to the signal from the VRC801. Press the device key again
to confirm the code for the device.
4. Reading Out the Code (3 digits)
Hold SET and press
. The first digit is indicated by the number of times the LED flashes.
Hold SET and press . The second digit is indicated by the number of times the LED flashes.
Hold SET and press . The third digit is indicated by the number of times the LED flashes.
Factory Settings for the Device Codes
DEVICE FACTORY SETTING BRAND
TVTXT1 027 Philips RC5 (TV)
TVTXT2 075 Telefunken (TV)
VCR1 278 Philips RC5 (VCR)
VCR2 284 Grundig (VCR)
SAT/CAB 424 Philips RC5 (SAT)
CAB/SAT 521 GMI – 909 (CABLE)
HiFi/CD/LD 552 Philips RC5 (CD)
5. Power Supply
Two AAA-batteries (not incl.)
6. Power Source
We have already mentioned that there may be several codes that enable you to control certain functions of a device.
However, you should remember that there is only 1 code that will enable you to control ALL functions of a device. This
is why you should test all functions BEFORE accepting a code as the right one for a particular device.
Example :
The correct code for a certain model of TV by Toshiba is #139. The key for the functions “CONT+/-“ en “COL+/-“
(contrast and colour)” for code #139 is “
☼
+/-“.
Code #137 enables you to control the functions POWER and CH+/- en VOL+/- , but not the functions CONT+/- of
COL+/-. Consequently, you should use code #139 : it is the only one that allows you to control all functions of this
device.
The information in this manual is subject to change without prior notice.