PCUSBVC3
V. 01 – 07/05/2013
4
©Velleman nv
Click
[Finish]
to finalize driver installation.
The system will now ask to restart the computer. Select
[Yes, I want to restart my computer now]
.
Connect the
PCUSBVC3
to your video source (not incl., e.g. TV, camera, DVD...). Note that you must
connect the device to an S-video or Composite/audio
output
! Refer to the user manual of your video
source to locate signal output connectors.
[1]
not included.
Connect the USB-connector of the
PCUSBVC3
to a free USB port on your computer.
Note:
for signal
integrity, it is not recommended to connect through a HUB.
The system detects the new hardware on the USB port and a message box pops up. Select
[No, not this
time]
and click
[Next >]
.
Select
[Install software automatically]
and click
[Next >]
. Follow the instructions on the screen.
A window might pop up stating that the
SMI GRABBER Device
did not pass Windows logo testing; select
[continue anyway]
.
Click
[Finish]
to complete driver installation.
If any other components are found, please repeat the above procedure until the
[Found new hardware:
Your hardware is installed and configured for use]
-window appears.
Verify whether the drivers are installed correctly. Right click on
[My computer]
and click left to select
[Properties]
.
Go to the
[Hardware]
tab and select
[Device manager]
.
Go to the
[Sound, video and game controllers]
.
Locate the
[SMI GRABBER Device]
. If no exclamation marks (yellow triangles) are shown in front of the
device names, the installation was successful. Otherwise, remove the driver, disconnect and reconnect the
PCUSBVC3
to re-install the driver.
