5
SAFETY & WARNINGS
Instruments grounds are interconnected and connected to PC ground. Max. voltage between probe tip and ground: 30V AC+DC at all
times! Before performing any measurement, make sure that the circuit is galvanically seperated from the AC power (mains)!
If necessary, use a safety isolation transformer.
H
OW
TO
INSTALL
PC-L
AB
200
SOFTWARE
?
Minimum system requirements :
Windows™XP/Vista/7 (*) 32 or 64bit
•
VGA display card (1024x768 recommended)
•
10MB free hard disk space.
•
Mouse or pointing device.
•
Free USB port (1.1 or 2.0)
•
Download the latest software version from www.velleman.eu
Type PCSU200 in the search box and check the
download section.
Download the PcLAB200_setup.zip
fi
le
•
Unzip the
fi
les in a folder on your drive
•
Double click the “setup.exe”
fi
le
•
An install wizard will guide you trough the complete installation
procedure. Shortcuts to the Pc-Lab200 software can be installed.
(*)
Note:
You will need local Administrator privileges to successfully complete the installation, contact
your system administrator for assistance. See also the “ReadME”
fi
le in the installed folder.
*Microsoft Windows™ XP/VISTA/7 (*) are registered trademarks
www.velleman.eu
ax. voltage betwee
e circuit is galvanically s
nnected to PC grou
k
th t th
und. Ma
i