2
procedure. Shortcuts to the PCSU01 software can be installed.
Note
: You will need local Administrator privileges to successfully complete the installation, contact
your system administrator for assistance.
See also the “ReadME” file in the installed folder.
Starting the software
:
Locate and run the PCSU01 software.
At first time, the oscilloscope will be calibrated automatically.
*Microsoft Windows™ XP/Vista/7/8/10 (*) are registered trademarks.
SAFETY and WARNINGS
Important safety information!
Instruments grounds are interconnected and connected to PC ground. Max. voltage between probe tip and
ground: 30V AC+DC at all times!
Before performing any measurement, make sure that the circuit is galvanically separated from the AC power
(mains)! If necessary, use a safety isolation transformer.
Warranty
This product is guaranteed against defects in components and construction from the moment it is purchased and for a period of ONE YEAR starting from
the date of sale. This guarantee is only valid if the unit is submitted together with the original purchase invoice. VELLEMAN Ltd. limits its responsibility to
the reparation of defects or, as VELLEMAN Ltd. deems necessary, to the replacement or reparation of defective components. Costs and risks connected
to the transport, removal or placement of the product, or any other costs directly or indirectly connected to the repair, will not be reimbursed by VELLEMAN
Ltd. VELLEMAN Ltd. will not be held responsible for any damages caused by the malfunctioning of a unit.
Connections
Signal input connectors
(max 30Vac+dc)
USB power indication
The unit is connected to the USB port of the computer, using a USB cable.
