2
Features
record DC signals or slow-moving signals over very long periods
the measurements are automatically stored on your hard disk for further processing
Easy to use mini clips
thanks to the USB connection no power supply is necessary and installation is easy and
straightforward
signals are instantly displayed on the PC screen using an analogue or DVM display
USB cable included
Software for download (includes demo)
Specifications
hardware:
USB connected and powered
four DC-coupled input channels
input resistance: 100kohm
maximum samples per second: 1000
six input ranges: ±400mV, ±800mV, ±2V, ±4V, ±8V and ±20V
sensitivity: 3mV
accuracy: ±3% of full scale
maximum input: ±30Vdc
power and recording/diagnostic LED
dimensions: 85 x 14mm
software:
analogue trace or DVM readout
4 channels record simultaneously
minimum / maximum sample hold function for DVM
from 20 ms to 1000 sec per division
storage and recall of screens (full colour) or data
automatic recording option for long recordings
on screen markers for time and voltage
DLL included for your own developments
system requirements
:
Windows XP, Vista, 7, 8, 8.1, 10 (*) 32 or 64bit
free USB port
Software installation
Download the latest software version from
www.velleman.eu.
Type PCRU01 in the search box and check the download section.
• Download the
PCRU01_setup.zip file
• Unzip the files in a folder on your drive
• Double click the “setup.exe” file
An install wizard will guide you through the complete installation
procedure. Shortcuts to the PCRU01 software can be installed.
Note
: You will need local Administrator privileges to successfully complete the installation, contact
your system administrator for assistance. See also the “ReadME” file in the installed folder.
Starting the software
:
Locate and run the PCRU01 software.
At first time, the recorder will be calibrated automatically.
*Microsoft Windows™ XP/Vista
/7/8/10 (*) are registered trademarks.
