Velleman MML10 Скачать руководство пользователя страница 1

MML10 version 2                                                                                                                                                      GB 

MML10 – Message Board 

 
 

1. Features 

 
 
Your electronic message board is ideal for advertisements and meetings. You can programme 
up to four original messages and set the message board to repeatedly run a single message or 
run several messages in a programmed sequence. You can also connect the message board to 
your alarm system and programme a fifth message that only appears when an intruder triggers 
your alarm system. 
 

Additional features include : 

 
Adjustable scrolling speed  : controls the speed with which the message scrolls across the 

display. 

Memory backup 

: saves your messages for up to a year if the message board is not 

connected to an AC power source. 

 
Warning :  Do not use the message board in your vehicle. Using such a device in your vehicle 

endangers other motorists and constitutes a penal act is some countries. 

 
 

2. Installation 

 
 
You can place the message board on a horizontal surface or mount it on a wall. If you plan to 
connect the display to your alarm system, you should select a location where people can read 
the alarm messages, e.g. in front of a window. 
 
Caution : This message board is designed for indoor use only. Protect the device against water, 

moisture and excessive heat in order to ensure proper operation. 

 

Placing the message board on a table 

 
Place the message board on a stable and horizontal surface (e.g. a table). Use a screwdriver to 
loosen the screws at the back of the device if you wish to adjust the viewing angle of the 
message board. Retighten the screws afterwards. 
 
 
 
 
 
 
 
 
 

FIG. 1 

Содержание MML10











Отзывы: