MICW41_v2
HQPOWER
2
MICW41 – DUAL WIRELESS UHF MICROPHONE SYSTEM
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying an HQPOWER product! This 8-channel state-of-the-art wireless microphone system will offer you
a high level of operational stability and ease of use thanks to the LCD and CPU circuitry. Please read the manual
thoroughly before bringing this device into service. If the device was damaged in transit, don't install or use it and
contact your dealer.
2. Safety Instructions
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device
against damage by leaving it switched off until it has reached room temperature.
Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.
Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.
Note that damage caused by user modifications to the device is not covered by the warranty.
Keep the device away from children and unauthorised users.
3. General Guidelines
This device is designed for professional use on stage, in discos, theatres, etc. The
MICW41
should only be used
indoors with the included power adapter connected to an alternating current of max. 230VAC / 50Hz.
Do not shake the device. Avoid brute force when installing or operating the device.
Select a location where the device is protected against extreme heat (see “
Technical Specifications
”), dust and
moisture.
Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified
people. Any damage that may occur will most probably be due to unprofessional use of the device.
Use the original packaging if the device is to be transported.
All modifications of the device are forbidden for safety reasons.
Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,
crash, etc. Using the device in an unauthorised way will void the warranty.
Make sure there is no flammable material within a 0.5m radius of the device.
Only operate or transport the device at temperatures within the range +5°C ~ +35°C.
Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
Keep this device away from rain and moisture.
