Velleman MICROBIT, Руководство пользователя

Страница: 10 / 144

VMM502
V. 01 – 17/01/2019 10 ©Velleman nv
Step 2
 Connect the buzzer to P0 on the BoB.
 Connect the ADKeypad to P2 on the BoB.
 Make sure for all components that the colour of the wires matches the colour of the pins on the
breakout board.
G = ground = black wire, V (3V3) = power = red wire, S = data or signal pin = yellow wire.
Step 3 – Pre-Coding
 Go to http://www.makecode.com . Click onto the micro:bit button to enter the code editor.
 We will need to add a package of code to be able to use our kit components. Click on Advanced in the
Code Drawer to see more code sections and look at the bottom of the Code Drawer for Add Package =
Extensions.
 The following pop-up window appears.
 Now we search for Tinkercademy . Type Tinkercademy in the search box and hit enter.
 Click on the Tinkercademy (button) package for downloading and adding it into the Code Drawer.
 Click on the Tinkercademy button.