Velleman K641LX, Инструкция по сборке

Страница: 12 / 24

12
Assembly
Final assembly (fig 5.0):
Fit the front panel with four 45mm bolts, and push a 10mm distance tube on each bolt. Push the display
module on the bolts up to the distance tubes and fix the module by means of four nuts (check if the displays
are flush with the front side of the front panel). Push another four 10mm distance tubes on the bolts, followed
by the processor module (with its components towards the front panel) and take care that the through
connections are made. However don't solder them until the module has been fixed by means of four nuts.
Now push another four 10mm distance tubes on the bolts followed by the supply module with its components
at the back. Fix the module using four nuts and make the through connections TS,V2,+V etc... with the
processor module
FIG. 5.0