VDPDMXC146 VELLEMAN
7
9) Inserting or Adding a Step to a Programme
•
Press MODE SELECT to select 1-24 SINGLE / PRESET PARK. The green LED indicator
lights.
•
Use the PAGE button to select the page (1 – 4) where the scene is to be added or inserted.
•
Slide both master faders (MASTER A = 0 and MASTER B = 10) to the lowest position, place
the FADE slider in the highest position and the SPEED slider in the lowest position (SHOW
MODE).
•
The channel fader of the step to be inserted should be slid upwards.
•
Press RECORD
•
Select CHASE/SCENES (red LED indicator is lit) with the MODE SELECT button
•
Hold the EDIT button
•
Press the flash button of the scene that has to be inserted in that step.
•
Release the EDIT button (the yellow LED indicator of the selected scene is lit)
•
Press the STEP button until you reach the scene that will
immediately follow
the scene to
be inserted
•
Press INSERT to add the scene to that programme step.
•
Hold the RECORD button
•
Press the REC EXIT button
•
Release both buttons to leave the programming mode
10) Selecting and Running a Programme
•
Press MODE SELECT until the green LED indicator marked ‘1-24 SINGLE / PRESET PARK’
is lit.
•
Select the desired page (1 – 4) with the PAGE button
•
Slide the MASTER faders to the highest position
•
Move the channel slider for the scene in question to the lowest and then the highest position
to select and run the programme stored under that fader.
11) Running a Programme with TAP SYNC rhythm control
•
Make sure the music control function is not active (press the AUDIO button to extinguish the
AUDIO LED indicator if necessary).
•
Press the PARK button to select MIX CHASE. The yellow LED indicator is lit
•
Select the programme you want to run
•
Adjust the speed slider and press TAP SYNC twice to define the beat time
•
Hold REC SPEED.
•
Press the appropriate flash button under PRESET B to store the new settings
12) Running a Programme with the Speed Slider
•
Make sure the music control function is not active (press the AUDIO to extinguish the AUDIO
LED indicator if necessary).
•
Press the PARK button to select MIX CHASE. The yellow LED indicator is lit
•
Select the programme you want to run
•
Move the speed slider all the way down to SHOW MODE
•
Hold REC SPEED.
•
Press the appropriate flash button under PRESET B to store the new settings
The programme is now controlled through the real-time movement of the SPEED control.
