VDPL1212RGBWA
V. 01 – 24/09/2014
8
©Velleman nv
16
green
000
255
intensity from 0-100 % (zone 3)
17
blue
000
255
intensity from 0-100 % (zone 3)
18
white
000
255
intensity from 0-100 % (zone 3)
19
amber
000
255
intensity from 0-100 % (zone 3)
20
red
000
255
intensity from 0-100 % (zone 4)
21
green
000
255
intensity from 0-100 % (zone 4)
22
blue
000
255
intensity from 0-100 % (zone 4)
23
white
000
255
intensity from 0-100 % (zone 4)
24
amber
000
255
intensity from 0-100 % (zone 4)
60-channel mode:
channel
function
from
to
description
1
red
000
255
intensity from 0-100 % (LED 1)
2
green
000
255
intensity from 0-100 % (LED 1)
3
blue
000
255
intensity from 0-100 % (LED 1)
4
white
000
255
intensity from 0-100 % (LED 1)
5
amber
000
255
intensity from 0-100 % (LED 1)
6
red
000
255
intensity from 0-100 % (LED 2)
7
green
000
255
intensity from 0-100 % (LED 2)
8
blue
000
255
intensity from 0-100 % (LED 2)
9
white
000
255
intensity from 0-100 % (LED 2)
10
amber
000
255
intensity from 0-100 % (LED 2)
channels 11 to 55 control LEDs 3 to 11 in the same manner as channels 1 to 5
56
red
000
255
intensity from 0-100 % (LED 12)
57
green
000
255
intensity from 0-100 % (LED 12)
58
blue
000
255
intensity from 0-100 % (LED 12)
59
white
000
255
intensity from 0-100 % (LED 12)
60
amber
000
255
intensity from 0-100 % (LED 12)
8.
Cleaning and Maintenance
All screws shall be tightened and free of corrosion.
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) shall not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting
supports, do not change the location of the connections…
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
Disconnect the device from the mains prior to maintenance activities. Let the device cool down.
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
Do not immerse the device in any liquid.
There are no user-serviceable parts, apart from the fuse.
Contact your dealer for spare parts if necessary.
Replacing the Fuse
Only replace the fuse by a fuse of the same type and rating.
1.
Before replacing the fuse, switch off the device and unplug the mains lead.
2.
Unscrew the fuse holder below the powerCON connections
[2]
on the rear panel of the base with an
appropriate screwdriver.
3.
Remove the old fuse and install the new fuse in the fuse holder.
4.
Replace the fuse holder in the housing and tighten it.
