Velleman HAM212, Руководство пользователя

Страница: 5 / 31

HAM212
V. 02 – 23/02/2016 5 ©Velleman nv
3. General Guidelines
Refer to the Velleman ® Service and Quality Warranty on the last pages
of this manual.
Protect this device from shocks and abuse. Avoid brute force
when operating the device.
 Familiarise yourself with the functions of the device before actually
using it.
 All modifications of the device are forbidden for safety reasons. Damage
caused by user modifications to the device is not covered by the warranty.
 Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
 Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
 Keep this manual for future reference.
4. Features
The HAM212 tag has a door sensor. Whenever a door or window has been
opened, the tag will send an alarm notification to your smartphone or tablet
through your home wifi connection. The free app for Android
® and iOS ®
allows you to manage the status. Configuration is plug and play via the free
cloud service. The battery power is only used during an alarm trigger.
5. Operation
Refer to the illustrations on page 2 of this manual.
1. Install the NexusHome app on your smartphone, create your account
and register (make sure to use either WPA or WPA2).
2. Next, connect your smartphone to the router to be used. Make sure
the 2.4 GHz 802.11b/g/n protocol is used.
3. Enter the app and select “Add Device/wifi Setting” under Profile.
4. Enter the password of the router to be used.
5. Insert the batteries in the module. To do so, unscrew the cover from
the housing, install the batteries according to the correct polarity.
Once done, connect the module to your smartphone using the included
cable.
6. Pair the module to your smartphone by pressing “Pair New Device”.
After a successful pairing, disconnect the module. Also, close the
battery cover. Note that, if you move the module, you will receive a
notification message.
7. Now, fix the module onto the desired location, e.g. a window, door,
safe…