FM6
26.10.2009
©Velleman nv
4
5.
Overview and use
Refer to the illustrations on page 2 of this manual.
1 radio ON/OFF + volume control
6 built-in speaker
2 solar panel
7 LED torch
3 antenna
8 cranking handle
4 LCD
9 main power switch
5 radio tuning knob
10 3.5mm DC jack
Top view:
a Earphone jack
f set hour button
b torch ON/OFF button
g set minute button
c alarm set button
h LCD backlight
d time set button
i frequency band
e alarm ON/OFF button
j charge indicator
6.
Charging
Refer to the illustrations on page 2 of this manual.
•
There are 3 ways to charge the device. While charging, the charge indicator [j] will light up.
o
Cranking: unfold the handle [8] and rotate it with ±3 rpm (max. 4rpm). Rotate steadily;
rotating to slowly will produce a weak charging current, cranking too violently might damage
the cranking system. Do not crank more than 5 minutes when battery is charged or more than
15 minutes when battery is low. Do not abruptly change cranking direction. Switch off the
torch for faster charging.
Notes:
Be careful not to injure fingers or nails when cranking.
To extend battery lifetime, crank for at least 1 minute once per month.
The device will get warm when cranking for a longer time.
Always fold the handle [8] back in place when finished cranking.
o
Solar panel: place the device with the solar panels [2] facing the sun for continuous solar
charging.
o
External power: connect the included USB cable into the DC-jack [10]. Plug the USB
connector into a powered USB port or suitable 5V adaptor. Charge time 6~8 hours.
•
It is also possible to charge other digital devices e.g. mobile phones. Connect the digital device
to the DC-jack [10] using the included cable and suitable plug. Crank as described above. The
charge indicator [j] will light up.
7.
Operation
Refer to the illustrations on page 2 of this manual.
•
Make sure the main power switch [9] at the bottom of the radio is in the ON-position.
•
The time is indicated on the LCD [4]. Press the backlight button [h] to increase readability.
Backlight switches off automatically after ±10s.
•
Hold down the time set button [d] and press the set hour button [f] to change the hours. Press
the set minute button [g] to change the minutes.
Note: the clock only has a 12h format: AM (before noon) and PM (after noon) are indicated in
the upper left corner of the LCD.
•
Release the time set button [d] when the correct time is set.
•
Hold down the alarm set button [c] and press the set hour button [f] to change the alarm hour.
Press the set minute button [g] to change the alarm minutes. Release the alarm set button [c]
when the correct alarm time is set.
•
Press the alarm ON/OFF button [e] to enable/disable the alarm. A small icon is shown on the
display [4] (top right corner). When the alarm time is reached, the radio will start playing. Make
sure the radio is tuned to a radio station (see below) when using the alarm function. Press the
alarm ON/OFF button [e] to end the alarm.
•
Turn the radio ON/OFF + volume control knob [1] to switch the radio on and control the
volume.
•
Set the frequency band to AM or FM with the frequency band button [i].
Содержание FM6
Страница 2: ...26 10 2009 FM6 2 6 Vellema an nv...