Velleman CAMTVI13, Руководство пользователя, Страница: 8 / 58

CAMTVI13
V. 01 – 09/01/2017 8 ©Velleman nv
5. Installation
Refer to the illustration on page 2 of this manual.
1 lens 5 fixation ring
2 IR LEDs 6 mounting ring
3 light sensor a power plug
4 camera b video plug
6. Installation
1. Disassemble the camera. You should have three parts: the mounting
plate, the fixation ring and the camera.
2. Choose a location for the camera, keeping following guidelines in
mind:
o
do not install the camera in locations where extremely high or low
temperatures or excessive vibrations may occur.
o
avoid mounting the camera near high electro-magnetic fields.
o
do not aim the camera at the sun or other extremely bright objects
or reflections (e.g. metal doors).
3. Use the mounting plate to determine the position of the mounting
holes. Drill the holes.
4. Fix the mounting plate on the ceiling or wall with the four screws.
Place the camera on the mounting plate and slide the fixation ring over
the camera. Tighten the locking screw slightly.
5. Connect all wires. Set up the desired field of observation by adjusting
the position of the camera in the fixation ring.
6. Tighten the locking screw to fix the fixation ring.