CAMSETW9
VELLEMAN
3
1.
2.
scanning for all available channels
1. Press loop key once to start
2. Press loop key again to confirm
and scanning begins
lock or unlock the keys of the remote
control
In normal mode, press once to lock,
"
d
" flashes; press again to unlock, "
e
"
flashes
Remarks:
•
Press
to select one channel.
•
Press
to scan channels automatically
•
Press
or
to stop scanning the channels.
•
Press
once after the setting is done to lock the remote control against unintentional touching or interference
from other IR remote controls. The icon "
d
" is now displayed; The keys on the remote control no longer work
when the remote is locked. Just press
to unlock the remote again ("
e
" is displayed).
8. Camera Channel Set-up
The channel number for the camera is printed on the camera. Use the channel button to select the same channel for
the receiver as for the camera. The image is now displayed on the TV.
9. General Guidelines
•
Protect the device against water and don't put objects containing water (e.g. vases) on top of the device
•
Turn off the camera/receiver if the system is not in use.
•
Use the adapter to connect /disconnect the device with/from the mains.
•
Do not cut off the DC power cable to try and use it with a different power source
10.Specifications
Operating temperature
-10
to +50°C/ +14 to +122°F
Storage temperature
-30
to +85°C/ -22 to +185°F
Operating humidity
85%RH
Camera
Imaging sensor
CMOS
Total pixels
628 x 582 (PAL); 510 x 492 (NTSC)
Viewing angle
62°
Transmission frequency
2.400 to 2.483MHz
Transmission power
10mW/CE; 2mW/FCC
Modulation type
FM
Bandwidth
18MHz
Power supply
8V DC
Effective range (line of sight)
100m
Consumption current
80mA & 120mA (IR ON)
Night vision range
7m
Dimensions (W x D x H)
Ø 44 x 56mm (without bracket)
Weight
220g
