CAMSCC14
00 (15/09/2008) 4
CAML16, CAML17, CAML18, CAML19, CAML20Z,
CAML21Z.
5.
Overview
Refer to the drawings on page 2 of this manual.
•
[A]
Flange adjustment ring, suitable for CS-mount
lenses. Use the included spacer for C-mount lenses.
•
[B]
Back focal lock screw. The camera is set at the
standard back focal position. Depending on the type of
used lens, slight adjustment may be necessary. Adjust
the lens back-focus by turning the focusing knob. Use
the included socket head wrench for this
.
•
[C]
Auto iris lens connector. Supply power and control
signals to the auto iris lens.
•
[D]
Direct Drive Level Adjustment. When using a Direct
Drive Lens, the Direct Drive Level for video output
brightness can be adjusted.
•
[E]
Power LED indicator, is on during normal operation.
•
[F]
DC12V input. Connect a regulated 12VDC power
supply (not incl.) to provide power to the camera.
•
[G]
Video output connector to connect the camera to a
monitor (not incl.)
•
[H]
AES/AI selector. Switch to
Auto Electronic Shutter
(AES) when a fixed or manual iris lens is used with this
camera. Switch to Auto Iris (AI) when using an auto iris
lens.
•
[I]
Iris VD/DD selector. Set to Video Drive (VD) when
using a video drive auto iris lens, or to Direct Drive (DD)
in case a direct drive auto iris lens is used.
•
[J]
Audio output connector. Connect the audio in of the
monitor to this connector.
6.
Connection
•
Mount a lens (not incl.) on the camera.
•
Set the lens selection switch
[H]
.
•
Connect the video output
[G]
to the video input of a
monitor (not incl.). Use a 75
Ω
coaxial cable (not incl.).
•
Connect the audio output
[J]
with the audio input of a
monitor (cable not incl.).
•
Connect a 12VDC power supply (not incl.) to the power
input
[F]
.
•
When using a video driven lens, connect the video drive
cable (not incl.) to the auto iris lens connector
[C]
. If
necessary, replace the cable connector by the included
cable connector. Refer to the drawing on page 2 of this
manual for the pin layout. Replacing the connector should
be done by a qualified technician.
•
To adjust the focus of the camera, loose the lock screw
[B]
on the flange adjustment ring
[A]
, turn the ring until
the desired focus is reached and retighten the lock screw
[B]
. Adjusting the focus should be done by a qualified
technician.
