CAMCOLD25
V. 01 – 17/06/2014
9
©Velleman nv
AREA NO 0–7
To define up to 8 areas. Select the desired area
and use the settings below.
STATUS: select ON to activate the selected
masked area; select OFF to deactivate the
selected masked area.
HORIZON SIZE:
set the width
[a]
(in pixels) of the
masked area.
VERTICAL SIZE
:
sets the height
[b]
(in pixels) of
the masked area.
HORIZON MOVE:
sets the distance
(in pixels) from
the left side of the
screen
[c]
for the
masked area.
VERTICAL MOVE:
sets the distance
(in pixels) from
the top of the
screen
[d]
for the
masked area.
Motion Detection
Use this function to see motion detection during live monitoring. You
can define up to 4 separate areas for motion detection. If the camera
detects motion in an area, the outer edge of that area will ‘flash’.
Menu: DIRECTION
SENSITIVITY
Set the motion detection sensitivity. With a higher
sensitivity, slighter movements will be detected.
Available options for sensitivity: WEAK (weak);
LOW (low); MIDDLE (medium), and HIGH (high).
