CAMCOLBUL32
V. 02 – 11/09/2012
4
©Velleman nv
hardware setup
3 to monitor
1
monitor connection
4 AC power cord
2
to camera
5 coaxial power supply
6.
Installation
Refer to the illustrations on page 2 of this manual.
7.
Technical Specifications
camera
pick-up element
1/3" Sony Exview HAD CCD sensor
scanning system
PAL
number of pixels
537 (H) x 597 (V) - PAL -
resolution
520 TV lines
min. illumination
0.01 lux / 0 lux (with IR LEDs on)
light wavelength
400 - 850 nm IR
number of LEDs
54
effective range
50 m
IR power on
CDS auto control activates LEDs when ambient light < 10 lux
IR LEDs
wavelength: 840 nm; angle: 40°; power: 200 mW
synchronisation system
internal sync.
interlace 2:1
interlace
video output signal
1.0 Vpp, 75 ohm, composite
video S/N ratio
> 52 dB (AGC off)
white balance
yes
auto electronic iris (AES)
1/50 - 1/100000 sec.
backlight compensation
yes
gamma correction
0.45
lens
f6 mm / F2.0
lens angle
53°
operating environment
temperature: -10°C to +50°C, humidity: < 90% RH
storage environment
temperature: -20°C to +70°C, humidity: < 70% RH
IP rating
IP68
power supply
DC power supply through coaxial cable
power consumption
4 W
dimensions
110 x Ø 75 mm
weight 2.9
kg
power supply via coax cable
camera power supply system
DC constant current via coaxial cable
maximum cable length
300 m of RG-59U cable
power consumption
6 W
power supply
230 VAC ~ 50 Hz
dimensions
218 x 44 x 96 mm
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
