CAMCOLBUL29
12.12.2011
©Velleman
nv
4
4.
Features
•
Weatherproof
•
with B/W night vision (IR LEDs)
5.
Overview
Refer to the illustrations on page 2 of this manual.
1 lens
5 position bolt
2 IR LEDs
6 bracket
3 light sensor
7 camera bolt
4 sunshield
6.
Hardware installation
Refer to the illustrations on page 2 of this manual.
•
Choose a location for the camera, keeping following guidelines in mind:
o
do not install the camera in locations where extremely high or low
temperatures or excessive vibrations may occur.
o
avoid mounting the camera near high electro-magnetic fields.
o
do not aim the camera at the sun or other extremely bright objects or
reflections (e.g. metal doors).
•
Use the mounting bracket [6] to determine the location of the mounting
holes. Drill the holes and secure the bracket [6] using 3 screws.
•
Attach the camera to the mounting bracket [6] with the camera bolt [7].
•
Connect the power connector [B] to the 12VDC power supply (not incl.).
•
Connect the BNC connector [A] to a monitor (not incl.)
•
Point the camera towards the field of interest and tighten the position bolt
[5].
7.
Technical specifications
pick-up element
1/3" HR colour CCD image sensor
pixels 512(H)x582(V)
PAL
horizontal resolution
420 TV lines
min. illumination
0.05 Lux
IR LEDs
14
range (IR light)
15m
S/N ratio
> 48dB (AGC off)
water-resistance IP67
electronic shutter
1/50 to 1/100000s
lens angle
92.6°
white balance
automatic
AGC yes
standard board lens
f3.6mm / F2.0
video output
1.0Vpp composite, 75 ohm
