Velleman CAMCOLBUL16, Руководство пользователя, Страница: 4 / 17

CAMCOLBUL16
19/01/2009 4 Velleman
®
5.
Overview
Refer to the illustrations on page 2 of this manual.
A heat-resistant fixed ring F zoom adjust
B heat-resistant waterproof ring G focus adjust
C 2mm tempered glass H 4~9mm varifocal lens
D heat-resistant fixed ring I vandal-proof housing
E light IR LEDs J sunshield
1 video 5 cable exit - bottom
2 power 6 hex screw – vertical position
3 cable exit - backside 7 hex screw – horizontal position
4 cable exit - top
6.
Installation
• Choose the location for the camera, keeping following guidelines in mind:
o
do not install the camera in locations where extremely high or low temperatures or
excessive vibrations may occur.
o
avoid mounting the camera near high electro-magnetic fields.
o
do not aim the camera at the sun or other extremely bright objects or reflections (e.g.
metal doors).
o
The connection cables run at the inside of the mounting bracket, and leave at the
backside
[3] (default). They can be re-guided to leave via the top [4] or bottom [5] of
the mounting bracket.
• When the connection cables need to go through the wall, a hole of at least Ø20mm (max.
Ø35mm) must be foreseen at the mounting location.
• Guide the cables though the cable hole when applicable. Mount the mounting bracket on the
wall using 4 screws (included). Note that the camera must be resting on top of the
mounting bracket.
• Release hex screws [6] and [7] (hex key included) and point the camera to the desired
field of observation. Tighten hex screw [7] to secure the horizontal position and hex screw
[6] for the vertical position.
• Connect the video connector [1] to a monitor (not incl.).
• Connect the power connector [2] to a 12VDC power supply (not incl.).
• Manually adjust the zoom with screw [F] and the focus with screw [G] . These screws are
located at the back of the camera under protective caps. After adjusting, replace the
protective caps.
• The sunshield can be mounted or dismounted by sliding the sunshield towards the front of
the camera.
7.
Technical specifications
IP rating IP66
scanning system PAL
pick-up element Sony CCD sensor
image size 1/3"
number of pixels 500(H) x 582(V)
resolution 420 TV lines
min. illumination 0.8 lux (IR off) / 0 lux (IR on)
max. IR projection distance ± 70m