AVMOD9 & 10 GB
4
Remark :
The receiver automatically detects the receiving channels and displays them in sequence. One single channel is received
continuously if the switch for that channel is the only one to be placed in the ON position, regardless of the position of the
fifth switch. If more than channel has its switch in the ON position, then the auto sequence function will be work for the
activated channels.
The receiver automatically sets channel 1 as the receiving channel if not a single channel switch is in the ON position.
9. Troubleshooting
There is no signal :
•
Check if the receiver is connected correctly to the TV you're using for signal reception.
•
Check the ON/OFF switches of the camera and the receiver.
•
Make sure the power plugs are pushed all the way in.
•
Check the power switch of the TV.
•
Check all cable connections.
•
Make sure the same channel is selected on the camera and the receiver.
•
If you connect the receiver to the TV via an RF modulator, check whether the TV is set to the same channel as the
switch of the RF modulator (3 or 4).
You're getting a weak signal or there's interference
•
Reorient the antennas. Read p. 3 : “Orienting Devices”.
•
Se the same channel on the camera and the receiver.
•
Make sure there is no microwave oven between the camera and the receiver. If so, remove the microwave or turn it off.
•
The camera and the receiver should not be placed more than ± 100m apart.
•
Check the setting of the receiver's channel DIP switches.
10. Maintenance
•
Protect your
AVMOD9
or
AVMOD10
from moisture. Water contains minerals that corrode electronic circuits.
•
Do not store this device in dusty or dirty environment to avoid damage to moving parts.
•
Do not store the device in a hot environment. High temperatures decrease the lifespan of electronic devices and plastic
can melt.
•
Do not store the device in a very cold environment. When the device is then moved to a warmer environment this may
lead to condensation inside the housing.
•
Do not try to open the housing. Have the device repaired or overhauled by a schooled technician.
•
Do not drop the device and do not shake or hit it. Rough handling may damage internal circuits.
•
Clean the device with a soft cloth and a mild detergent. Do not use solvents or abrasives.
•
Only use the supplied net adapters.
These articles can be sold in Belgium
:
(AVMOD9)
(AVMOD10)
