6
Connection
Valve Control Amplifier
8020
Monitor
Line
Aux
CD
Tuner
AV
AC POWER
FUSE
250mA
Check
voltage
setting
L
L
IN
OUT
R
R
CAUTION
Risk of electric shock
Disconnect mains before opening
MAX 16VA
115VAC
230VAC
!
(*1) At first time power up, or after a mains voltage failure, the +6dB LED will lit
together with the standby/mute LED.
(*2) Line level is a source with voltages between 150mV and 2V.
5. Monitor output, can be used to connect to the audio
record input of your tape, VCR, MD, CDR… recorder.
CONNECTION
Connect the amplifier inputs to the different sources. Use good quality audio
leads. Respect the Left and Right channels. Connect the output to a suitable ste-
reo power amplifier or two mono amplifiers (e.g. our 4020, 4040, or 2x 8010) .
Connect the power-cord to the mains connector. Check for correct mains volt-
age. Normally the standby/mute LED at the front will be lit (*1).
4. Audio/Video audio input. Use this input to connect your audio
signal coming from a VCR, DVD, MD, CDR player/recorder...
3. Tuner input. Use this input to connect your tuner, or other normal line
level (*2) unit.
2. CD input. Connect you CD player or other line level (*2) unit to this input.
1. Auxiliary input. Connect any line level (*2) unit to this input.
8. Mains volt-
age indica-
7. Mains connector
and fuse holder,
replace only with
indicated ratings!
6. Line output. Connect to your power amplifier.
