6
HPS140MK2
USER MANUAL
CHANGING THE BATTERIES
4 x AAA
Watch the polarity!
SHORT MENU
Access the short menu by briefly pressing the menu button.
The short menu is used to change the most common parameters like volts per division or
time- base. For more advanced functions, the extended menu can be used.
Enlarge or reduce the signal vertically by adjusting
the voltage per division.
Adapt the scope readout to the probe setting “x1”
or “x10”.
Time base: More or less signal cycles will be visible
by modifying the time per division.
Select the desired voltage readout (Volt, dB, audio
power measuring...).
Parameters in reverse= auto-range mode.
Select the input coupling AC / DC or choose a zero
reference level (GND).
Note:
The menu will exit automatically if no button is pressed for a few seconds, or exit by a long press on
the menu button.
Hint:
In most settings, hold the UP or DOWN button pressed to activate the auto-range function.