6) Stop the dialling
If any time you want to stop the dialling, just press CE.
7) Dialling test
To check if the Voice Dialler can actually dial the number you have
set and send the pre-recorded message, press TEST then key in the
priority number (1-6) of the telephone number you wish to test.
When dialling is successful, the Voice Dialler automatically
broadcasts the message(s) three times following the sequence of
message 1-2-3-1-2-3-1-2-3, if there are 3 messages recorded.
When the number dialled is engaged, the Voice Dialler will redial the
number for a maximum of 5 times with an interval of 62 seconds.
To stop the testing, just press CE.
6. How to connect the auxiliary detectors
1) The 5-pin terminal block is for connecting any existing non-wireless
detectors. They are labelled 1 to 5 from left to right on the PCB.
}
}
}
}
12V DC
FIRE ALARM DETECTOR INPUT
BURGLAR ALARM DETECTOR INPUT
EMERGENCY INPUT
