d. Store the telephone number in an EPABX telephone system.
If you Voice Dialler is installed in an EPABX system, the
EPABX access code "0" or "9" and * key must be keyed in after
the priority number.
Press SET
Key in priority number (1-6)
Press 0 or 9 (EPABX access code)
Press *
Key in phone number up to 18 digits
Press SET
2) Cancel the telephone number
a. When two same priority number has key in, the last telephone
number will overwrite the previous number. For example, you
have first key in priority number 1 and telephone number 223344,
then afterwards you have key in priority number 1 and telephone
number 445566. The telephone number 445566 will be recorded
as priority number 1.
b. If any of the priority number is to be cancelled :
Press SET
Key in priority number (1-6)
Press SET
3) Record the emergency message
With a total message capacity of 20 seconds, the choice is your
whether you store 1, 2 or 3 separate messages of variable length for
different situations (fire, burglar & panic/emergency).
If you record 3 messages, record the fire alarm message as message
no. 1, the burglar alarm message as no. 2 and the panic/emergency
alarm message as message no. 3. This is necessary so that the system
can send out the appropriate message depending on the type of alarm.
