velda 3L PP180215, Инструкция по эксплуатации

Страница: 14 / 24

10
TWO IMPORTANT STEPS FOR CORRECT OPERATION:
1. LEARNiNG PRoCEDuRE
This procedure must be executed for left and right side of the bed separately.
1.1 Before performing this procedure make sure the engine is not connected to the mains:
if this is the case please disconnect and wait for 10 minutes before starting the procedure.
1.2 press the buttons together for 10 seconds until Search appears on the screen.
The control will now look for 10 seconds to get into contact with an engine.
1.3 Connect the motor to the mains within 15 seconds.
1.4 A signal confirms the control is connected to the engine.
On the screen the letters MA appear.
1.5 Repeat this procedure for the second part of the bed.
2. LiNKiNG PRoCEDuRE
This procedure will connect the left control to the right control.
2.1 Press on the first control the buttons together for 10 seconds.
Blinking symbols 0-0-0 will appear on the screen.
2.2 Follow the same procedure for the second hand control.
2.3 The word Done will appear on the screen as soon as both hand controls have found each
other.
The bed is now ready for use.
1.4
1.3
1.2
2.3
2.2
2.1
*blinking
*blinking