IG-049-EN version 02; 02/10/2017
12
Transport
General Instructions
ormaset
Kiosk-type prefabricated transformer substation
7. Transport
7.1. Land transport
Transport of
ormaset
should be carried out using a truck
(maximum height of the platform: 1.5 m), following the
sequence below:
1.
Position the
ormaset
on four boards measuring
2000 x 150 x 20 mm, distributed evenly throughout the
width of the truck.
2.
The lashing must be carried out using ropes. These
ropes are hooked to the DEHA anchors that
ormaset
is equipped with, in order to ensure its stability during
transport.
3.
In order to prevent movements of the roof relative to
the body during transport, two 10 m slings must be
placed crosswise and tightened with a ratchet, as can
be seen in the figure.
1
Two ratchet-tensioned transverse slings, length: 10 m
2
Rope hooked to DEHA
3
Four 2000 x 150 x 20 mm boards
Figure 7.1.
Detail of
ormaset
land transport
7.2. Sea transport
Transport to the place of embarkation should be carried
out using a truck (maximum height of the platform: 1.5 m)
using a flat rack open container. The dimensions listed in
the figure must be observed and the following sequence
must be followed:
1.
Position the
ormaset
on four boards measuring 2000 x
150 x 20 mm, distributed evenly throughout the width
of the truck.
2.
Once
ormaset
is positioned inside the container, attach
four 100 x 100 x 10 mm and 100 mm long squares, one
at each corner of the
ormaset
enclosure. They must be
welded to the floor of the container in order to prevent
any movement during transport.
3.
In order to prevent movements of the roof relative to
the body during transport, two 10 m slings must be
placed crosswise and tightened with a ratchet, as can
be seen in the figure.
1
Open rack container
2
Two ratchet-tensioned transverse slings, length: 10 m
3
Four squares in the corners, 100 x 100 x 10, length 100 mm
4
Four 2000 x 150 x 20 mm boards
Figure 7.2.
Detail of
ormaset
on a truck, for sea transport
Содержание Ormazabal ormaset
Страница 27: ......
