14
Configuration and setting
Gain configuration
NOTE
If AUT is selected (recomended), the AGC
will try and maintain the output at factory
preset level. If M is selected the AGC will
maintain the output at the level you have
set.
1)
Locate and select the gain configuration mode
AUT / M.
i) If AUT is selected: self-equalising is configured.
j) If M is selected: locate and select the gain level
00 – 30.
General gain adjustment
1)
Locate and select the gain submenu:
2)
Locate and select the gain level:
k) BI - BII input: BI_BII, 0 - 25
l)
BIII - DAB input: BIII_DAB, 0 - 20
m) VHF-UHF/EXT input: VHF_UHF, 0 - 20
n) UHF output: UHF, 0 - 20
