![background image](http://html2.mh-extra.com/html/vela/tango-300/tango-300_instructions-for-use-manual_3941785007.webp)
7
1.5. SAFETY
This chair is CE marked and com-
plies with applicable EU regulations.
The chair is manufactured by:
VELA, Gøteborgvej 8-12,
9200 Aalborg SV, Denmark.
The VELA Tango 300/310 with
electrical functions meets all safe-
ty requirements according to IEC
60601-1, including requirements for
EMC according to IEC60601-1-2.
1.5.1. APPLICATION
This chair is an indoor chair
intended for sitting and private use.
::
The chair is not built to stand on
::
The wheel brake must always be
activated when sitting down or
standing up
All standard variants of VELA Tango
300* are tested and approved for a
maximum load of 200 kg.
*VELA Tango 300 with gasspring is tested and
approved for a maximum load of 175 kg.
All variants of VELA Tango 310 are
tested and approved for a maximum
load of 300 kg.
1.5.2. TRANSPORT
When transporting the chair by
car, airplane or any other means of
transport, always use the chair brake.
The chair is not approved for use as
a passenger seat in any means of
transportation and may not be used
as such.
The chair is designed to be
transported under the following
environmental conditions:
Temperature: - 20°C to + 60°C
Humidity: 15-95%
Allow the chair to stand for 24 hours
before use if it has been stored
below - 10°C.
IN GENERAL
*VELA Tango 300 mit Gasfeder wurden für eine maximale Last von 175 kg.