1 4
2.0.18. PUSH HANDLE (OPTIONAL)
Push handle for transporting a person in the chair. The push
handle should be mounted on the back wheel towers.
Note
: The push handle is also available in a configuration that can
be adjusted in height. Loosen the screw located in the middle of
the rod. Adjust the height. Remember to tighten the screw.
2.0.20. ANGLE CONTACT (OPTIONAL)
Mounted under the left or right armrest - depending on
the users needs. Remember to place the plug in the correct
aremrest (see section 2.0.3.).
Note
: VELA Tango El is available with remote controlled height
adjustment (i.e. if caregivers must be able to adjust the height).
2.0.19. FOOTBRAKE PEDAL (OPTIONAL)
VELA Tango with footbrake pedal can be used by pressing the top
part of the pedal forwards. Unlock the chair by pressing the foot
brake back in its original position.
Note
: The foot pedal can be mounted in left or right side at the
back of the chair.
2.0.17. FOOT PLATE (OPTIONAL)
The foot plate can be adjusted in length by loosening the hand
screw in the center of the rod on the footrest. Remember to
tighten the screw afterwards. The foot plate can be folded up
so that it does not interfere when getting in and out of the
chair.
